شما به اینترنت متصل نیستید.

برد توسعه دهنده STM

برد STM8S003F3P6 از جمله برد های 8 بیتی خانوادهstm با فرکانس مرکزی 16 مگاهرتز می باشد که دارای حافظه فلش 8 کیلوبایتی و حافظه EEPROM مجتمع شده می باشد. این بردها با اندازه بسیار کوچکی که دارند عملکرد بسیار خوب و قابل اطمینانی از خود نشان داده اند.

  • Description:
  • The STM8S003x value line 8-bit microcontrollers feature 8 Kbytes Flash program memory, plus integrated true data EEPROM. The STM8S microcontroller family reference manual (RM0016) refers to devices in this family as low-density. They provide the following benefits: performance, robustness, and reduced system cost. Device performance and robustness are ensured by integrated true data EEPROM supporting up to 100000 write/erase cycles, advanced core and peripherals made in a state-of-the art technology, a 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system. The system cost is reduced thanks to high system integration level with internal clock oscillators, watchdog and brown-out reset.
  • STM8S003F3P6 board Application:
  • Tutorial courses
  • smart circuits
  • Environments controller
  • etc.
  • Features:
  • Use STM8S003F3P6 as the main control IC
  • Support SWIM debugging mode
  • Lead out all pins
  • USB MINI cable to get power
  • Optional external crystal oscillator
  • Pin count: 20
  • Maximum number of GPIOs (I/Os): 16
  • Ext. interrupt pins: 16
  • Timer CAPCOM channels: 7
  • Timer complementary outputs: 2
  • A/D converter channels: 5
  • High sink I/Os: 12
  • Low density Flashprogram memory (bytes): 8k
  • RAM (bytes): 1k
  • True data EEPROM (bytes): 128
  • Peripheral set: Multipurpose timer (TIM1), SPI, I 2C, UART window WDG, independent WDG, ADC, PWM timer (TIM2), 8-bit timer (TIM4)
  • Technical Information:
  • Core board schematics (PDF format) x 1
  • Pre-programmed test program source code (IAR STM8 format) x 1
  • STM8S_MiniKit_20 core board main features:
  • 1: Use STM8S003F3P6 for control IC
  • 2: leads all pins, mark out the next pin pins, pin should make their own welding, optional up or down (bring your own pin)
  • 3: Support SWIM debug mode
  • 4: USB MINI line to take power, or 2.54 pin to take power
  • 5: Optional external crystal (bring your own)
  • 7: PD3 pin, pick up a LED light, easy debugging
تاکنون هیچ نظری ثبت نشده است.
برای ثبت نظر وارد حساب کاربری خود شوید.